Acoustically Rated Buildings
To learn more about noise control for
the Oil & Gas Industry Click Here

Our Acoustical
Consulting Services
Include:

  • Noise and Vibration Measurements
  • Noise Level Monitoring Programs
  • Noise Management Reports
  • Acoustical Permitting Studies
  • Detailed Frequency Analysis
  • Noise Impact Computer Modeling
  • Mitigation Evaluation and Design
  • Noise Mitigation Systems


Contact Us to Learn More!

Acoustically Rated Buildings

Permanent compressor sound wall Compressor Noise Control Walls 

Our ENC Model “BR” Acoustical Building system is designed to have a superior sound transmission class (STC) rating along with a high noise reduction coefficient (NRC) to effectively block and absorb unwanted noise created by gas compressors and related equipment.  Our acoustical compressor buildings are fitted with air intake and discharge silencers, ducting, acoustically rated man doors and roll up doors, overhead cranes and are fully customizable. 

The ENC Model “BR” Acoustical Building system is designed utilizing standard metal building technology, including pre-painted exterior metal surfaces and conventional structural support construction. An acoustical absorber material and an acoustical barrier septum material are installed between the metal exterior of the building and an interior perforated metal skin.

The combination and spacing of the acoustical barrier septum and acoustical absorber material in the building wall dictates at which frequencies the peak noise absorption and transmission loss are achieved. After performing detailed frequency measurements of the compressor noise, ENC optimizes the acoustical performance of each of our acoustical compressor buildings by designing a custom combination of inner wall materials to best block and absorb the measured compressor frequency spectrum.

To provide the necessary air flow to the gas compressor units while at the same time providing optimum industrial noise control, we install an integral intake and discharge silencer and ducting system which are incorporated within the acoustical building. The design, placement and sizing of the air intake and discharge silencers system is determined by computer noise model evaluation.

Overhead cranes, removal maintenance access panels and custom exterior treatments are available in all of our Model “BR” Acoustical Building systems.  All ENC Model “BR” Acoustical Buildings are designed to meet or exceed IBC wind, structural and seismic loading requirements.

Certified laboratory tests on the ENC Model “BR” Acoustical Building wall and roof system established an STC-40 rating per ASTM E 413-87 and an NRC of 1.15 per ASTM E 795-93. The acoustical buildings can be constructed in any size or geometry to enclose the noise sources and provide the required sound attenuation.

Control your industrial noise today with an acoustical compressor building from Environmental Noise Control. Contact us today to request a quote!


Site Map | Privacy Policy | Site Credits: Ecreativeworks